KEYDIY FGB08 PCB Key Board for Volkswagen & for Audi 5D Type is specific for 5D type, and no need generation.
First, read the data from the original key to retrieve the service code.
Please note that the FGB08 remote is supplied without a key shell, so a compatible key shell must be installed before use.
On the PCB, the last two buttons may not respond at this stage. This is completely normal. They will become fully functional once the learning/programming process has been successfully completed.
Then we start to generate and learn FGB08 key.
In KD App, select IMMO Programming-VW- 5C/5D Immobilizer System- Start execution.
Select Read original car key and generate a dealer key.
Next, select the corresponding service code.
The KD-X4 will then prompt you to choose the key type.
Select KD FGB-type remote, and then choose the correct frequency.
Finally, place the FGB08 key (assembled with the key shell) into the KD-X4 induction coil to proceed with programming.
Generate FGB08 remote successfully.
Then learn FGB08 key in car.
You can check the video: