For a Honda ADV350 (K1ZN2) All-Keys-Lost job, the KEYDIY KD-X4 and KD-MOTO Motorcycle Adapter are used to generate and program the replacement key.
Tools Required
KD-X4 Key Programmer
KD-MOTO Adapter
2 dedicated matching harnesses
KD-ZB51 Smart Key
12V power supply
Key Generation
1. Go to Remote Function > Remote Test>two-color light ADV350 (K1ZN2).
2. Place the KD-ZB51 transponder chip on the KD-X4 induction coil. Select Generate > Wireless Generation and wait for the generation to complete.
3. Check the induction status before programming. Hold the indicator to switch between red (induction OFF) and green (induction ON). Keep induction ON for the key matching procedure.
Wiring & Connection
1. Enter Immo Programming > MOTOR > HONDA > Key Matching (21PIN) > Start Execution.
2. Open Wiring Diagram and check the connection points. The diagram can be zoomed in for a clearer view. Two points, Tools and RST, need to be soldered.
3. After soldering the points, connect the two matching harnesses and then connect the 12V power supply.
PIN Reading & Key Matching
1. Select Read PIN Code > OK > OK to read the two secret keys. Record or screenshot the data for reference.
2. Select All Keys Discarded > OK, then enter the valid original vehicle key PIN code and confirm.
3. The key matching process will start. Wait for the operation to complete.
Verification
Read the secret keys again and compare them with the data recorded earlier. The new key should match the previous data. Perform key identification again, then confirm that the motorcycle starts and its basic functions work normally.